Release date£º2018/5/23
Calcium hydroxide equipment production line is a lump of limestone, through a series of production processes such as crushing, transporting, digestive reaction and powder selection, and finally producing qualified and high-quality calcium hydroxide products. In the production line, because the produced products are powder solid, and the fineness is high, it is very easy to produce pollution phenomenon, so there must be a dedusting process in the production line. Now let's introduce the dust removal equipment on the production line of calcium hydroxide equipment.
The general use of pulse belt duster on the production line of calcium hydroxide and dry dust filter can effectively overcome the shortcomings of anti blowing dust cleaning and some old equipment. It has strong cleaning ability, high dust removal efficiency, low emission concentration, low air leakage rate, low energy consumption, less occupied area, reliable operation and stable operation, as a result of gravity. Settle down, fall into the ash, and reuse it.
The products produced by the production line of calcium hydroxide equipment are widely used in all kinds of electric furnace dust removal, iron and steel plant, waste treatment, smelter, aluminum plant, cement plant, lime kiln and other fields. However, no matter which field is applied to, the dust removal equipment on the production line can not be lacking.
Release date£º2018/5/23
The salt rich environment-friendly fly ash drying line has a large volume of processing. It is tailored to the specific needs of customers. It has low running cost, stable system and uniform drying quality. Our customers are very satisfied with our dry coal ash drying technology, and we are very satisfied with the quality of the same material drying customers.A few days ago, the fly ash drying line has been completed. After the strict inspection of the Ministry of quality inspection, we have decided that after all the indexes are up to the standard, they are immediately hoisted to the car for the customers to arrange shipments so as to arrive at the Hunan installation site at an early date.
Release date£º2018/5/23
In mid February 2016, we signed a contract for dust removal equipment on the sand and stone project of Zong Gru hydropower station in Nigeria with China Hydropower Construction Group International Engineering Co., Ltd. The dedusting equipment exported to the project is very important. After the contract is signed, the project team is set up immediately to clarify the specific division of labor and other details in this project, so as to ensure the effective promotion of the project construction. We provide customers with a more comprehensive and systematic dust removal solution, which is based on this concept. From the first generation to the present environmental protection, intelligent transition, the salt rich environmental protection with the original technology design, generation after generation of technical upgrading of the perfect interpretation of the dust removal trunk line innovation and breakthrough, to ensure the maximum value of the customer.
Release date£º2018/5/23
When the explosion-proof dust collector is sent to Vietnam to collect explosive dust, the dust is diluted with air, and the concentration of the dust in the pipe is far below the lower limit of the explosion. The non flammable powder, such as clay and bentonite, is continuously supplied from the middle of the system, such as clay and bentonite, so as to dilute the explosive dust in the dust collector to prevent the danger of explosion and fire.
The unique explosion-proof device can completely solve the hidden trouble caused by the explosion of dust removal medium.
After off-line cleaning, there are no two dusts and good dedusting effect.
Filter bag self sealing, good sealing performance, high dust removal efficiency.
The air box type structure has small resistance loss and is convenient for checking and replacing filter bags.
Full automatic control, easy operation and high reliability.
Release date£º2018/5/23
The MD pulverized coal pulverized machine produced by our company is a high performance powder separator with coarse powder separation and horizontal eddy current selection. It is mainly used in wind sweep coal grinding system, and can also be used for the separation of fly ash and other materials.
The system output can be increased by 10-15% compared with the static separator, and the grading performance is stable.
Patent eddy current scatter device, energy saving 30-40% or more, small resistance.
The fineness is easy to adjust, and the operation is simple.
The vulnerable parts are all wear resistant materials or treated by anti-wear technology, and wear is small.
Release date£º2018/5/23
Three separation and high efficiency eddy current separator is the latest scientific and technological product developed by our company on the basis of the introduction of Danish Smith high efficiency powder separator. The product integrates the plane eddy current classification principle of the O-Sepa pulverizing machine and the method of collecting the finished product of cyclone dust removal. It makes the three separation swirl vertical cage high efficiency pulverizing machine have the best performance price ratio. It lays a good foundation for the promotion and use of the three separation high efficient eddy current separator. The three separation high efficient eddy current separator is simple in configuration and the process cloth is used. It is a new way and method to improve the quality and output of cement enterprises in the new situation. Since the three separation efficient vortex classifier has been put on the market by many cement enterprises, users have received great economic benefits.
